Fountain Pen Restoration

The House Of Pencraft

I enjoy restoring large flat top pens like these. The Kraker bodies of the late 1920s and early 30s were very colorful and I really enjoy the various colors that they used for end pieces. This week’s pen is no exception, and has a few twists.

As you can see below, it came from an estate, and in a Pencraft box, complete with instructions.  At first glance, there is nothing very unusual. It is a Kraker Pencraft, made in Libertyville, IL, which dates it in the very late 1920s or very early in the 30s.  At that time Kraker had a contract to produce pens for Rexall, under the name Monogram, among others.  The box says Pencraft and the directions are for Pencraft/Dixie Pens and Pencils.

Below is the pen after I reduced it down to its parts.  The hanging pressure bar still works and is in good shape so there is no need to replace it with a jbar.  From what I can see, it appears that the pen was never used as there is no indication of ink anywhere in the pen (cap, nib, feed, section or hardened sac).  I would guess that it had been in the box for quite some time.  The nib, clip, cap bands, and lever all polished up well and needed little work.  I polished the outside of the barrel and cap which are black smooth plastic.  After assembling the section/feed/nib, I attached a size 18 sac and reinserted the section into the pen.   The hanging pressure bar system works well and the pen is ready to go.

Below is the restored pen, a Monogram/Pencraft with orange and yellow ends.  What I had not noticed when I received the pen was that the cap has a familiar Monogram clip and a Pencraft Body.  When I first looked at the pen I just assumed that the cap “jewel had discolored to a dark/dirty yellow.  Now it is clear that the cap is a mismatch.  The two fit together perfectly ~ just the imprints and jewels are mismatched.

The pen measures 5 7/16″ capped and 6 13/16″ posted.

So why are the cap and barrel different?  Well, I can only hazard a few guesses, and will never really know.

Perhaps, the pen was repaired and when it was sent back to Pencraft for repairs they substituted either the cap or barrel.  Or perhaps this pen was produced near the end of the production in Libertyville and they were just using up remaining parts.  Or perhaps the pen was a mistake and either the barrel or cap was placed in error.  I can play “perhaps”  for quite a while, and we will never know.  My leaning is that they were near the end of production in Libertyville and simply using up parts and this pen was the product.

Below is the direction sheet that was in the box.  Note the ink stains.   This seems to run against my initial observation that the pen had not been used before.  The title of this article ~ The House Of Pencraft ~ comes from the pencil page.  I had never seen this term before.

I looked up the name Theodore Haake on the internet and no persons with ties to fountain pens or Michael George came up.  I am not certain if this was the owner of the pen (though this is written in pencil) or possibly someone from the factory.

Here is the strong imprint, with Michael George Co (Kraker) mentioned.

The nib is a Forever Nib #6.  I have seen Forever, Everlasting, Dixie, and Warranted Nibs used on Kraker pens of this era.  Everlasting and Forever are interesting names, perhaps in response to Parker and Sheaffer’s ” Lifetime ” guarantees.

It seems that sometimes ” the more we know, the less we know”.  These mysteries of the vintage pen are often intriguing and forever and everlastingly a challenge to sort through.

June 24, 2010 Posted by | Belmont Pens, Dixie Fountain Pens, Kraker, Monogram Fountain Pens, Pencraft Pens, Rexall, Yankee Pen | , , | 1 Comment

Monogram Pearl and Black Fountain Pen

Black and Pearl pens are treasured by collectors for their interesting patterns, and for the lack of surviving clean examples.  Time (insert aging sacs and ink residue) has not been kind to these pens and most have discolored badly. All of the large pen makers of the 20s and 30s made them ~ most notable are the Parker Duofold, Sheaffer Balance, and Wahl Gold Seal Pearl and Black Pens.  A collector can expect to pay $ 500 and above for clean examples of the pens listed above.

This brings me to this week’s restoration.  It is a large Monogram pen in Pearl and Black that probably dates to the late 1920s, the same time that the Big Three were producing Pearl and Black beauties.  As you may recall, Monogram Fountain Pens were a house brand of Rexall Stores, made during this period by George Kraker.

Previous posts referring to Monograms are as follows:

Rexall Monogram – February 7, 2008
Pencraft – June 1, 2008

Below is a photo of the pen after taking it apart.  You can see that the parts are in good shape, aside from a stained feed and nib, as well as the gold bands and lever.  The sac and j-bar were absent from the pen after I removed the friction fit section/feed/nib assembly.  I thoroughly cleaned each piece, making certain to scrub the inside of the cap and removing all of the ink residue.  All of the gold parts cleaned up to their original luster and the pen was ready for reassembly.  As this is a large pen, a large j-bar and long size 20 sac were used and attached to the section/feed /nib.  This will guarantee a very large ink supply in the future.  I used a silicon sac to help prevent future discoloration of the barrel, which has survived quite well.

Here is a photo of the completed pen which measures a very large 5 1/2 inches closed and 6 7/8 inches posted.  The double cap band and top cap band are a nice touch to this premium Rexall brand pen.

The clip is a typical Kraker clip seen on many of his Pens (Yankee, Dixie, Belmont, and Monogram).

The nib is a very large “Everlasting” L, which I assume to be for Large.  In my April 24, 2009 post, Pencraft Chicago the Pencraft / Kraker nib was a Pencraft “L”. These nibs with sizes occur in some of his pens.  I am not certain that this nib is original to this pen, but tend to think it is, given the “L”.

Here is a photo of the imprint on the barrel.  It reads:

The Monogram Pen

NON BREAKABLE

SOLD ONLY AT The Rexall Store

Given the popularity of the Pearl and Black pattern of this pen and the fact that Kraker was still making pens for Rexall in the late 1920s,  I would guess that this pen was produced in Libertyville, IL in the late 20s by Kraker’s Pen Company.   It is a very attractive pen and the color has survived very well over the past 80 years.

January 12, 2010 Posted by | Kraker, Monogram Fountain Pens | , | 1 Comment

Pencraft

Last week’s post – Belmont/Rexall and Yankee Cousins – was about two pens that were nearly identical, but made with different imprints; one for a Kraker Company and one for Rexall Stores. This week follows a similar theme. The pen restored this week is a Pencraft, made by the Michael George Company of Libertyville, Illinois. The Michael George Company was a Company owned by George M. Kraker, a man discussed in many of the posts in this blog. As you may recall, Kraker left Grand Haven, Michigan in 1929 and moved to Libertyville. I am not sure how long he was in Libertyville, but he did show up in Chicago by 1938. In Libertyville, he produced pens for Rexall and under his own Pencraft, Dixie and possibly other names.

This pen came to me in typically discolored condition.

Photobucket

As you can see, the pen is a typical lever filler that needed to be cleaned from top to bottom. Interestingly, this one came with no lever on the inside. Someone had previously taken it apart, but had not finished the restoration. I cleaned the nib with simichrome and an ultrasonic cleaner and also scraped the section to remove remnants of the old sac.

I inserted a new j-bar and size 16 sac and the resulting pen is shown below.

Photobucket

Below is the imprint showing the Pencraft and Libertyville, Ill. location.

Photobucket

And the Pencraft “30” 14K nib.

Photobucket

Finally, this pen above the pen restored in my February 7 post – Rexall Monogram – in which I surmised the Monogram pen below (sold at Rexall Stores) was made by Kraker, prior to the contract with Rexall expiring.

Based on the similarity of the two pens, I may have been on the right track.

Photobucket

June 1, 2008 Posted by | Kraker, Monogram Fountain Pens, Pencraft Pens, Rexall, Uncategorized | , | Leave a comment

Belmont/Rexall and Yankee Cousins

Back on January 27th of this year I wrote about restoring a Yankee Pen, made by a George Kraker Company in Grand Haven, Michigan. The post can be found under the title: A Yankee in Michigan. I just picked the pen up below and it bears a very close resemblance. The clear red top is just a bit wider and brighter, but the chasing, lever, and clip are identical. Both also have the same feed, section and Warranted No. 2 nib. Also, the barrel print type is the same. The only difference is that this pen reads:

BELMONT

PAT

NON BREAKABLE

SOLD ONLY AT

THE REXALL STORE

The Yankee Pen, covered in the referred post reads:

YANKEE

NON BREAKABLE

GRAND HAVEN, MICH. – PAT

As you can see from the picture below, this pen came with a severely tarnished clip and lever, as well as a very grimy nib. There was no pressure bar present, so I replaced the j-bar and added a new sac. I spent quite a bit of time and energy on cleaning the lever and clip. I used Simichrome and a Dremel to grind away the initial caked-on grime and then used tooth picks and q-tips to remove the tarnish from the hard to reach areas. The sac remnants were completely removed from the section and a new size 16 sac was cemented to the section. The nib polished up completely and looks new. The nib and feed were inserted into the section and the pen was water tested.

Photobucket
Here is the completed pen with shiny Warranted No. 2 nib. I used a white crayon to highlight the crisp imprint.
Photobucket

I have placed the two pens referred to above next to each other to show the similarity.

Photobucket

I have read that George Kraker still had the contract to produce pens for Rexall when in Michigan and later possibly in Libertyville, IL (refer to my post of February 7, 2008 titled Rexall Monogram). These pens are just another proof of this. I have read that the contract was then taken over by the Moore Pen Company of Boston, MA. Later Belmont pens contain several Moore-like characteristics which back this up.

I will post some of these in later posts.

May 22, 2008 Posted by | Belmont Pens, Kraker, Monogram Fountain Pens, Rexall, Uncategorized, Yankee Pen | | 3 Comments

A Yankee in Minnesota

In my post of January 27, 2007, titled A Yankee in Michigan, I repaired and discussed a Yankee Pen made by a George Kraker pen company in Grand Haven, Michigan. In that post, I mentioned that I had a Yankee Pen from Minnesota. Well, two weeks ago, I came across another Yankee Pen, from the Minneapolis Pen Company. The clip on this one is the same as the clip used by Kraker in Michigan and on the Monogram Pen discussed on February 7. Having read several expert opinions, I am quite confident that the Minneapolis Pen Company and the Yankee Pen that I am restoring here is another Kraker product. I would place the date in the early 1920s after he left Kansas City and prior to Grand Haven, MI.

The picture below is of the pen after being taken apart. The sac had reduced to a fine dust. As you can see, the hard rubber chasing is in excellent shape, as is the color and imprint. the nib and feed were very dirty and needed to be scraped (feed) and cleaned. The nib is a nice Warranted 14K with no size number. The section needed to be scraped to remove all signs of the previous sac.

Photobucket

Photobucket

I installed a size 16 sac and the pen works fine. Below are pictures of the restored pen closed and posted.

Photobucket

Photobucket

I want to point out the unique lever. This lever is one that appears on many Kraker pens of the period. The first photo below is the lever of this pen. You can also see the same lever on a Winter Robbins pen, featured in my post of December 7 of last year, titled Hard Rubber Midwest Style.

Photobucket

Finally, here is another pen, a Drew Pen Company (St. Paul, MN) with the same lever again. It would lead me to believe that Kraker may have been involved in some way with the manufacture of several of these pens.

Photobucket

May 15, 2008 Posted by | Drew Pen Company, Hard Rubber Pen, Kraker, Minneapolis Pen, Minnesota Pens, Monogram Fountain Pens, Winter - Robbins, Yankee Pen | , , | Leave a comment

Rexall Monogram

Monogram pens have been discussed briefly in a few earlier posts. They were a house brand of pen for Rexall Drug Stores.

Photobucket

At one point the contract for Monogram pens was held by George Kraker and he produced these pens at his Grand Haven, MI location and possibly in Libertyville, IL and Minneapolis, MN. Here is a picture of a mottled Monogram that I have had for quite some time. It carries the distinctive Kraker clip and opaque morroon cap top. It has a Monogram 14K nib and a Lotz’ patented lever, which is a Kraker product.

Photobucket

The pen that I have worked on over the past few days is a Monogram with a clip that is very similar to the Kraker Company clips, though in gold. It is a marbled white and black plastic that is an excellent example of what happens when an ink sac and ink deteriorate inside a barrel and cap over the course of seventy years. Here is a picture of the pen after I took it apart. Three things are interesting to me. First, the discoloration is very pronounced on on the barrel and the condition of the sac can explain the thorough discoloration. Unfortunately, this discoloration can not be reversed. Second, the pressure bar is different from many lever fillers that you see. It is not a traditional jbar type bar, but a round base that sits against the end of the barrel with a hook on it which attaches to the bar. It is in surprisingly good shape and I will be able to reuse it. All that will be needed for this restoration will be a new sac. Third, I like the addition of the tiered black ends of the cap and barrel. This is a nice touch.

I went in search of information on the pressure bar mechanism and was told that this was a pressure bar system that is common to Kraker Company Pens and also some National Pen Products Pens (Chicago). The research response also indicated that this Monogram pen was very similar to a Pencraft Pen. Pencraft Pens were made by the Michael – George Company (Kraker). So, I am going to say that this pen was made by Kraker prior to Rexall moving the contract away from him.

Photobucket

The actual repair for this involved the usual thorough cleaning. I made sure that all of the sac remnants and ink residue was removed from both the cap and barrel to stop the discoloration process for good. I also installed a silicone sac after cleaning the section/feed/nib. I was able to reinstall the pressure bar and base and the lever opens and closes easily and cleanly. Even though the pen has discolored, I polished it and worked out all of the spots from the gold clip, trim rings and lever. Though not a perfect representation of what the pen looked like when it sat on the drug store shelf in the 20s or 30s, it functions well and the 14K Monogram nib writes with a firm medium line.

Photobucket

Instead of discoloration, I prefer to say that it has “character“.

Photobucket

Edit 1-14-13: Mike H. sent me this photo of a matching pencil to this Monogram.  Thank you Mike!
Photobucket

February 7, 2008 Posted by | Kraker, Monogram Fountain Pens, Rexall | , , | 4 Comments

   

%d bloggers like this: