Fountain Pen Restoration

Moore Fingertip Variation Set

I have previously written posts about the Moore Fingertip ~

Moore Fingertip – September 6, 2012

Moore Fingertip Generation 2 – January 25, 2013

Moore Fingertip Variation – February 25, 2014

The Fingertip was one of Moore’s final Fountain Pen Products, produced in the late 1940s.  The first post above covers the standard Fingertip model and the second two cover a variation, which I call the second generation, but is simply a variant of the first with a metal cap. The third post focuses on a smaller size of the metal capped variant.

This restoration is of a Pen and Pencil set of the smaller variant metal capped Moore Fingertip.

As you  can see below, the pen is pretty clean and just needs a new sac.  These smaller Fingertips take a size 14 sac and the small barrel size makes for a very short cut and not a lot of ink.

I cleaned the section/nib in the ultrasonic cleaner and attached a new sac, trimming it to the correct barrel length.  Remember that the sections on Fingertips are friction fit.

 photo DSC_0003_zps9ed3cbf0.jpg

After polishing, here is the resulting set, in black with silver and gold cap.  The  pencil is actually very well made and cap actuated, clutch style, and takes 0.9 mm lead.

The pen is 4 9/16 inches closed and 5 1/2 inches posted.  The pencil is a short 4 1/2 inches.

 photo DSC_0001_zpsd479908a.jpg

 photo DSC_0002_zps95dbc789.jpg

The pen imprint ~

 photo DSC_0003_zps8209ccbd.jpg

The pencil imprint ~

 photo DSC_0006_zps4e4f32e2.jpg

And finally, the Presentation Box for this small, but attractive set.

 photo DSC_0001-1_zpsbdecfbe8.jpg

As you may have noticed, I have a soft spot for the Fingertip. I have recently come across a few different colors that are in pretty rough shape and will get to their restoration soon!

Advertisements

May 25, 2015 Posted by | Moore Fingertip, Morrison Fountain Pens | , | 1 Comment

   

%d bloggers like this: