Fountain Pen Restoration

Libertyville Dixie In Green And Black

George Michael Kraker made pens all over the Midwest (Kansas City, Chicago, Minneapolis, and Grand Haven, MI. All of these have been well covered in various posts over the years here. Libertyville, IL was his final stop, at least as far as the major production of pens is concerned. As varied as his stops in the Midwest were the brands of pens he made. Click on the blogroll at the right for Yankee, Belmont, Pencraft, Drew, and Monogram pen brands, and his influence is evident. Dixie Pens were a later model of his, perhaps to counterbalance his earlier and lasting Yankee brand. They were usually well made, colorful and often sporting contrasting colored cap and/or barrel ends.

This week’s project is no different, although a pattern I had not seen in person before. My friend, the late Dennis Bowden, had a few that he shared photos of with this pattern and I had always hoped to find one.

As you can see below, the pattern is a green and black plastic swirl.  Nothing exceptional to the pen – it is a standard Kraker lever filler, with the locking lever.

The sac had hardened, and the hanging lever system was still in place and functional.  Having an intact sac allows one to compare sizes, though I know that these usually take size 16, it is nice to have an old one to compare.

The nib is a Warranted No. 3.  Other Dixie’s that I have have all been made in Grand Haven, MI, except for a large yellow one, and had a mixture of Warranted and Dixie Nibs.  It needed quite a bit of careful cleaning, which was done with Pentiques metal cleaner and a slow dremel.

Photobucket

The section and feed were cleaned thoroughly using qtips for the section, after the old sac was cleaned off, and with an x-acto knife for the feed and its various grooves.

The inside of the cap was completely cleaned as I like to remove all the pesky ink deposits that like to reside here. The outside of the barrel and cap were polished along with the clip and cap band, which are not cheap plate and hold up well to polish.

The final result of this smallish pen is below.

Photobucket

The pen measures 4 1/4 inches capped and 5 3/4 inches posted.

Photobucket

I would be interested to see if there is a corresponding large pen, with No. 8 nib, as many of the surviving Dixie’s are this larger size. I am always on the lookout for these and look forward to more patterns and sizes.

About these ads

July 15, 2011 - Posted by | Dennis Bowden, Dixie Fountain Pens, George M. Kraker, Kraker | , , ,

1 Comment »

  1. That’s a very attractive pen. I agree, it would be really nice find a larger version with a No. 8 nib.

    Comment by Jon | July 16, 2011 | Reply


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 119 other followers

%d bloggers like this: